User Manual
Table Of Contents
- Product Overview
- Features
- Use Conditions
- Precautions/Safety
- Appearance Overview
- Specifications
- Controller
- Basic model - double control switch
- 1) Power-on/off
- 2) Fan speed regulation
- Upgraded version - LCD controller
- 1) Power-on/off
- 2) Fan speed regulation
- 3) Work duration threshold setting for the filter
- 4) Filter reset
- High configuration version - Intelligent controller
- 1) Power-on/off
- 2) Fan speed regulation
- 3) Operating mode switching
- 4) Auto mode
- 5) Filter reset
- 6) Timed on/off and time adjustment
- Installation
- Electrical Principle Diagram
- Electrical Installation
- Operation and Maintenance
- After-sales Service
8
Installation
General instructions
The user should entrust professional HVAC engineers with engineering design and
engage an experienced company with construction qualifications to complete engineering
construction. Design and construction should be implemented according to the relevant
codes and regulations of the state. Otherwise, the unit may fail to work normally. For the
after-sales service of this unit, TICA will charge a fee..
Installation position
(1) The following sites should be avoided for installation:
Near high temperature or open fire: A fire or overheating may be caused;
Where there is oil mist or oil gas, e.g., in a kitchen: A fire may be caused;
Where there are poisonous gases or corrosive substances, e.g., machinery works
and chemical plants;
Places with excess moisture, e.g., a bathroom: electric leakage, electric shock or
other problems may be caused;
Near a machine with radio electromagnetic radiation;
Where there is sulfide gas (e.g., a hot spring).
(2) Select an installation site according to the installation conditions and customer's
conditions:
Install the product at a place with sufficient strength and stability (e.g., the cross
beam, ceiling, and other places that can bear the machine weight); before using
hanging bolts to install the machine, check whether the ceiling is strong enough to
support the machine; if the strength is not enough, reinforce the ceiling before the
installation;
Do not install the machine by directly clinging to the ceiling or wall;
Install the unit at a place where cleaning and maintenance operations are convenient;
Do not cover or block the air inlet and outlet of the equipment so as to ensure the
optimal circulation of air.