T4.
TECHNICAL MANUAL T4.
TABLE OF CONTENTS Warnings....................................................................................................................................................................................................... Page 1 T4.1 Rifle Diagram ..................................................................................................................................................................................... Page 2 Universal Pack .......................................................
WARNING: This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for paintball must be worn by the user and persons within range. Recommend 18 years or older to purchase. Persons under 18 must have adult supervision. READ OWNER'S MANUAL BEFORE USING. WARNING/LIABILITY STATEMENT This marker is not a toy and is surrendered by Tiberius Arms, Inc.
T4.1 RIFLE DIAGRAM HPA TANK STOCK CHARGING ROD CONNECTING PINS BOTTLE ADAPTER CORE SAFETY 2 T4.
HOPPER PORT BARREL MUZZLE FLASH TIP BARREL LOCK MAGAZINE MODEL SPECIFICATIONS Caliber: .68 Action: Semi-auto Power: CO2/HPA Length: 11 inches T4.1MANUAL Height: Barrel Length: Weight: Magazine cap.: 8 inches 6.5 inches 2.7 lbs.
UNIVERSAL PACK INVENTORY LIST HOPPER ELBOW .050” "050. 5/64” 46/5 CO2 STEM WITH O-RING 3/32” 23/3 46/7 SPANNER WRENCH 7/64” mm4 61/3 ALLEN WRENCHES 3/16” 4mm REG BODY PLUG 4 T4.
T4.1 OPERATIONAL INSTRUCTIONS GETTING STARTED Read this entire manual before using this marker. Keep your marker pointed in a safe direction at all times. 1. SAFETY - The safety has 3 Functions: S-Safety, F-Fire, D-Disassemble. Place the T4.1 in safe position by aligning the safety switch with the “S”. The safety can be found on the left side of the gun just above the grip. CAUTION: The maker can still be fired in Disassemble mode. 2.
3. REMOVING THE BARREL - (1) Shut off the slide check attached to the tank. (2) Next, remove the magazine from the marker. (3) Slightly push in the barrel and rotate the barrel lock counterclockwise. Then pull down the barrel lock. (4) Your barrel is now free to slide out along the barrel lock track. 1 3 4 3 2 HOPPER ATTACHMENT 1.
LOADING PAINT Place 10 projectiles into the magazine from the top. The projectiles will be held in place automatically by the projectile retainer pin. PROJECTILE RETAINER PIN FIRST STRIKE® LOADING FIRST STRIKE Always load First Strike projectiles so rounded nose exits barrel first. Always chronograph with First Strike before use to ensure velocity is below 300 fps. T4.
CHARGING THE MAGAZINE To charge the canister remove it from the magazine. Then remove the magazine plug assembly from the canister. Insert a 12g cartridge as depicted on the canister. Then with the punctured knob screwed out as far as it can be in the magazine plug, attach the magazine plug to the canister.. Finally, tighten the Puncture Nob until the cartridge is punctured. T4.1 Mag Valve Assembly Canister 12g cartridge Magazine plug assembly 8 Magazine plug Puncture Knob T4.
LOADING MAGAZINE Place the magazine into the magazine cavity in the lower receiver. Once the mag has started into the cavity, seat it completely until has been secured by the magazine release. T4.
INSTALLING THE BOTTLE 1. Attach the bottle to the on/off ASA leaving the adapter in the off position. 2. Next, screw the ASA into the bottle adapter. 3. To air up the marker, switch the ASA to the ON position. 10 T4.
FIRING THE T4.1 1. If the CO2 cartridge has been punctured by the puncture pin and the magazine has been inserted into the gun, then the T4.1 is now ready to fire. Point the T4.1 in a safe direction, rotate the safety switch so that it is aligned with the “F”, and pull the trigger. NOTE - extra magazines can be carried for quick reloads in the field. UNLOADING THE T4.1 1. Place T4.1 in the safe mode and point in a safe direction.
CO2 STEM INSTALLATION SOLID CO2 STEM INSTALLATION 1. To replace the Solid CO2 Stem with the CO2 Stem, first remove the lower receiver from the upper receiver. 2. The CO2 Stem can be removed with a 4mm wrench or a small adjustable wrench. Be sure that O-Ring is on the Solid CO2 Stem. DO NOT OVER TIGHTEN onto the Reg. 12 T4.
T4.1 CLEANING & MAINTENANCE CLEANING Never perform maintenance on a loaded or pressurized T4.1 marker. Remove all projectiles and CO2 cartridges from the magazine and marker prior to doing any cleaning or maintenance. Never use petroleum based cleaning solvents or lubricants. Do not use cleaning solvents that come in aerosol cans. To clean the T4.1 marker, remove the barrel as described in the “Operational Instructions”. Use a .
WARRANTY AND REPAIRS Tiberius Arms Inc is dedicated to providing you with the quality support necessary for the utmost satisfaction of that technology. Tiberius Arms products are crafted with the finest materials and designed for trouble-free performance. We warrant that this marker is found free from defects in materials and workmanship for a period of 1 year from the original date of purchase. Unauthorized modifications alterations, neglect, or abuse of this product voids any warranty.
T4.
1 2 3 5 6 8 7 16 T4.
UPPER RECEIVER ASSEMBLY ITEM NO. 1 2 3 4 5 6 PART NUMBER 42-2046 T4-2943 H-S 440 5/16 P4-1940 41-2540 H-B 832 1/2 NAME ITEM NO. Upper Receiver Release Fork - T4 Release Fork Screws Barrel Catch Assembly Assembled Regulator Regulator Rear Screw - T4 7 8 9 10 11 PART NUMBER H-B 832 7/8 H-WSHR 8 T T4-1847 H-B 832 5/16 H-B 832 1/4 NAME Reg Body Screw Reg Bod Tooth Washer Lower Tac Rail Tac Rail Screw Barrel Catch/Lock Screw 4 11 9 10 T4.
UPPER RECEIVER ASSEMBLY ITEM NO. 1 2 3 4 PART NUMBER SPRG49 T4-1745 T4-1746 T4-1946 NAME Charging Handle Spring Stop Block Stop Block Pin Hopper Converter ITEM NO. 5 6 7 8 PART NUMBER H-S 440 3/4 T4-1740 H-S 440 3/8 MR-1973 NAME Hopper Converter Screw Charging Handle Assembly Lower Hopper Converter Screw Hopper Cover Plate 1 3 2 18 T4.
6 5 4 T4.
UPPER RECEIVER ASSEMBLY ITEM NO. 1 2 3 PART NUMBER NAME ORNG 006-B90 Reg Sealing O-Ring H-SSS 632 1/8 Alternate Air Sealing Screw 42-2041 Alternate Air Attachment ITEM NO. 4 5 6 PART NUMBER H-B 632 3/8 T4-1848 H-B 832 5/16 NAME Alternate Air Screw Side Tac Rail Tac Rail Screw 1 3 2 20 T4.
6 5 2 4 T4.
1 2 3 22 T4.
UPPER RECEIVER ASSEMBLY ITEM NO. 1 2 3 4 PART NUMBER T4-1848 H-B 832 5/16 H-B 832 1/4 T4-1940 NAME Side Tac Rail Tac Rail Screw Barrel Catch Screws Barrel Catch Assembly T4.
UPPER RECEIVER ASSEMBLY ITEM NO. 1 2 3 4 5 PART NUMBER ORNG 018-P70 AC-4057 42-2143 42-2141 ORNG 022-B70 NAME ITEM NO. Bottle Adapter O-RIng Stock Ring Bottle Adapter Bottle Adapter Core Adapter Core O-Ring 6 7 8 9 PART NUMBER AC 4056 41-2100 81-2105 41-2240 NAME Stock Plate T4.1 Engine Gun Body Cap T4.1 Firing Bolt 7 8 5 4 1 2 3 6 24 T4.
9 T4.
LOWER RECEIVER ASSEMBLY 4 3 5 13 12 2 11 6 7 9 10 1 ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 8 26 PART NUMBER NAME 42-1541 T4-1441 T4-1443 T4-1642 T4-1044 SHCS 440 5/16 SPRG 41 T4-4041 SPRG 46.2 BHCS 10-24 x1 WSHR 10-808 DOWL 1/8 x_1 1/2 NUT 10-24 Lower Receiver Mag Catch Button Mag Catch Safety Switch Brass Detents Mag Catch Screw Mag Catch Spring Handle Detents Spring-Safety Handle Screw Handle Lock Washer Mag Guide Pen Handle Nut T4.
Bolt Pin Bolt Set Screw g O-ring O-ring 1 1 1 1 2 8 2 3 9 7 4 6 5 4 ENGINE & FIRING BOLT ASSEMBLY ITEM NO. 9 2 1 2 3 4 5 6 7 3 PART NUMBER NAME 81-2101 81-2104 45-2107 ORNG 110-P70 41-2240 ORNG 019-B70 ORNG 020-B70 Air Chamber Plug Air Chamber AC Shock Absorber AC Cap O-Ring T4.1 Firing Bolt AC Plug O-Ring AC OD O-Ring NOTE: Do not attempt to disassemble the bolt and firing pin. The alignment is factory set using fixtures and can't be reassembled correctly outside the factory.
TRIGGER GROUP ITEM NO. 1 2 3 4 5 6 7 8 9 PART NUMBER 41-2541 H-F 832 3/8 45-2402 45-2401 45-2405 SPRG10 45-2404 SPRG02 T4-2448 NAME Regulator Body-T4 Trigger Cover Screw Sear Trigger Cover Plate Release Release/Rotator Spring Rotator Sear Spring T4 Linkage 4 8 2 6 5 3 7 9 6 1 28 T4.
REGULATOR ITEM NO. 1 2 3 4 5 6 7 8 PART NUMBER NAME 41-2541 81-2502 81-2505 45-2506 81-2507 45-2508 BHCS 6-32x3/16 ORNG 006-B90 ITEM NO.
C02 VALVE HOUSING ITEM NO. PART NUMBER NAME 1 2 3 4 5 6 7 8 9 10 Valve Housing Valve Housing Sealing O-RIng C02 Valve Spring CO2 Drum Valve Valve Spacer C02 Valve Spacer O-Ring C02 Cap CO2 Canister (Sing) C02 Valve Body O-Ring C02 Plug Assembly 41-3241 ORNG 017-P70 SPRG 03 81-3203 81-3213 ORNG 006-P70 81-3214 41-3248.0 ORNG 105-P90 41-3250 NOTE O-Ring #6 is the same size and color as O-Ring #10 on Page 29. This O-Ring is softer than the O-Ring on Page 29. 7 6 5 9 4 8 3 10 1 2 30 T4.
TROUBLESHOOTING PAINT BREAKAGE If you experience more than a small number of broken paintballs, then there are 4 things to check: 1. First, be sure that the marker is free of broken paintballs and other debris. 2. Second, make sure that the barrel is locked in its correct position, and that both detents are installed so that they catch a projectile as it enters the breach. 3. Third, make sure that the red First StrikeTM spring is not installed in the magazine (See page 10) 4.
888.982.
