Data Sheet

1/4/2019 tibbo.com/datasheets/tibbits/01.html

http://tibbo.com/datasheets/tibbits/01.html 1/2

Tibbit Module

#01

M1S

Four-line RS232 port

Simple RS232 port with only TX, RX, RTS, and CTS lines.

LINE A

LINE B

LINE C

LINE D

CPU

IO 1

IO 2

IO 3

IO 4

RS232

RTS

CTS

RTS

CTS

Form:M1S

Power:

5V - Consumes 20mA

Mates with:#19, #20, #21

Details

This is a standard "simple" RS232 port. This Tibbit is based on a generic RS232 transceiver (we use

Zywyn ZT232F).

For "normal" RS232 applications, this Tibbit has to be connected to the TX and RX lines of the CPU's

UART (see

[SER]

). Planning to use RTS/CTS ow control as well? An interrupt line must be available,

too (see

[INT]

PAGE 1
/4/2019 tibbo.com/datasheets/tibbits/01.html Tibbit Module #01 Four-line RS232 port M1S Simple RS232 port with only TX, RX, RTS, and CTS lines. 1 IO 1 2 IO 2 3 IO 3 4 IO 4 5 12 5V TX TX RX RX RTS CTS 6 RS232 RTS CTS 11 LINE A 10 LINE B 9 LINE C 8 LINE D CPU 7 Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details This is a standard "simple" RS232 port. This Tibbit is based on a generic RS232 transceiver (we use Zywyn ZT232F).
PAGE 2
1/4/2019 tibbo.com/datasheets/tibbits/01.html Combining this Tibbit with the "C" device #19 (DB9M connector) will create a serial port with standard pin assignment on the DB9M: #1 No connection #2 RX (input) #3 TX (output) #4 No connection #5 Ground #6 No connection #7 RTS (output) #8 CTS (input) #9 No connection You can also combine the RS232 Tibbit with #20 (9 terminal blocks).