Manualshelf

Data Sheet

ManualsBrandsTibbo ManualsSerial TTL / CMOSTibbo IO Ninja Serial Tap Sniffer for RS232, RS485, and TTL-level UART
12345678910
4 IO Ninja Hardware Manual (NHM)
©2000-2018 Tibbo Technology Inc.
Block Diagram
Using the Serial Tap
To start using the Serial Tap:
Install IO Ninja software (http://ioninja.com/).
On the Serial Tap, slide the mode selection switch into the desired position
depending on what interface you will be using — RS485, RS232, or UART (TTL).
Connect into the corresponding group of terminals on the terminal block. When in
the RS232 mode, you can also employ wedge RS232 monitoring method.
Plug the Serial Tap into the USB port of your PC.
Launch the Serial Tap plugin.