〖Please read the installation manual before installing and using the product〗 TCSG5416W Wireless Sounder Installation manual YINGKOU TIANCHENG FIRE PROTECTION EQUIPMENT CO.
Version Ver1.0 Date 24 Oct.2020 Ver1.1 4th Nov.2020 Author Liu Fen, Wang Gang Liu Fen Ver1.2 Ver1.3 30th Nov.2020 5th Feb.
TCSG5416W Wireless Sounder Installation manual Ver1.3 202102 1.Overview The TCSG5416W wireless sounder (hereinafter referred to as sounder) is suitable for installation in public places, factories and other environments, and is used in conjunction with the JB-TB-TC5126W wireless sounder control panel (hereinafter referred to as the panel).
TCSG5416W Wireless Sounder Installation manual Ver1.3 202102 panel, work stably and reliably, and have good suppression ability against electromagnetic interference. 3.Technologic Charateristics 3.1. Battery model: CR17450-2-080-02 3.2. Rated working voltage: DC3V 3.3. Working current: monitoring current ≤45uA alarm current ≤240mA .4. Indicator light: Fault light: yellow, flashing periodically when communication fails Working light: green, flashing periodically when communication is normal 3.5.
TCSG5416W Wireless Sounder Installation manual Ver1.3 202102 Figure 1 Schematic diagram of the appearance of the alarm 4.2.
TCSG5416W Wireless Sounder Installation manual Ver1.3 202102 segment should be set first, and the network setting should be selected on the menu interface of the alarm control panel (such as: JB-TB-TC5126W wireless fire alarm control panel, etc.) that can be equipped with the detector. After entering the network settings, first set the local address number, and then set the detector network segment according to the actual situation on site (29 optional). 7.2.
TCSG5416W Wireless Sounder Installation manual Ver1.3 202102 interference Note: After reporting the low battery failure, the sounder can still work continuously for 30 days in the monitoring state (it can work continuously for 4 hours in the sound and light start state). 9.Notes 1. After the signal passes through the wall, the signal strength will be greatly attenuated, so try to reduce the number of partition walls for wireless products. 2.
