Installation Manual

J- SAP -TC SB5406W Wireless Digital Manual Call Point
Installation making use instructions Ver1.1 202011
YINGKOU TIANCHENG FIRE PROTECTION EQUIPMENT CO., LTD
5
nearby and remove the source of
interference
The device's red light is off Low battery or no battery inserted Replacement battery
9.Notes
9.1 . Signal through the wall, the signal strength will be greatly attenuated, thereby minimizing the
number of partition between wireless products.
9.2 . When the product is mounted, away from the metal, thereby reducing the signal shielded metal
article, such a metal can not be installed in the fire hydrant box cabinets and the like, or the outer
metal cabinet.
9.3 . Installed at a low interference environment, and a large distance from the machine or electrical
equipment.
10.File and warranty
10.1 . Packing documents:
1) Packing List: 1 page
2) Instructions : 1 copy
2 . Warranty: My company responsible for the maintenance of the product , a problem please and
my company's technical service department, the user may not own disassemble or repair, or peril .
3 . Maintenance contact the following:
Liaoning·Yingkou Tiancheng Fire Equipment Co., Ltd.
Address: No. 11-2, Kechechang Xili, Xishi District, Yingkou, Pilot Free Trade Zone (Liaoning) China , City
Fax: [phone]
Postcode: 115004
Tel
：
400-6930-119
Email: [e-mail]
Website: www.tcfiretech.com