User's Manual
Table Of Contents
- I. General
- II. Main Characteristics
- III. Technical Specifications
- IV. Structure and Working Principle
- 1. Points for on-site installation
- The wireless performance indicators of this produc
- VI. Test
- 1. The detector must be tested after installation
- 2. Simulated fire alarm: After the networking is s
- 3. In the process of testing, the unqualified dete
- VII. Use and Operation
- 1.Network segment setting: Before the detector con
- 2. Device enters and exits the network: After the
- A) Network access: When the control panel is in th
- B) Network exit operation: When the control panel
- 3. Equipment alarm:
- When the smoke concentration in the environment re
- 4. Device reset: When the device reports a fire al
- 5. Restore factory settings: After the detector is
- Note: The button function only has one click, thre
- VIII.General Fault and Solutions
- IX. Maintenance
JTY-GM-TC5401WWireless Addressable Photoelectric Smoke Detector User Manual Ver1.0 202010
Yingkou Tiancheng Fire Protection Equipment Co., LTD
7
2. Warranty description: Our company is responsible for the maintenance of this product. If you find any problems, please
contact our company's technical service department in time. Users are not allowed to disassemble or repair by themselves,
otherwise the consequences will be at their own risk.
3. The maintenance contact information is as follows:
Liaoning·Yingkou Tiancheng Fire Equipment Co., Ltd.
Address: No. 11-2, Kechechang Xili, Xishi District, Yingkou, Pilot Free Trade Zone (Liaoning) China , City
Fax: 0417-4835568
Postcode: 115004
Tel：400-6930-119
Email: info@tcfiretech.com
Website: www.tcfiretech.com