User's Manual
Table Of Contents
- I. General
- II. Main Characteristics
- III. Technical Specifications
- IV. Structure and Working Principle
- 1. Points for on-site installation
- The wireless performance indicators of this produc
- VI. Test
- 1. The detector must be tested after installation
- 2. Simulated fire alarm: After the networking is s
- 3. In the process of testing, the unqualified dete
- VII. Use and Operation
- 1.Network segment setting: Before the detector con
- 2. Device enters and exits the network: After the
- A) Network access: When the control panel is in th
- B) Network exit operation: When the control panel
- 3. Equipment alarm:
- When the smoke concentration in the environment re
- 4. Device reset: When the device reports a fire al
- 5. Restore factory settings: After the detector is
- Note: The button function only has one click, thre
- VIII.General Fault and Solutions
- IX. Maintenance
JTY-GM-TC5401WWireless Addressable Photoelectric Smoke Detector User Manual Ver1.0 202010
Yingkou Tiancheng Fire Protection Equipment Co., LTD
1
I. General
JTY-GM-TC5401W Wireless Addressable Photoelectric Smoke Detector (hereinafter referred to as the detector) is an
intelligent industrial fire detector made according to the principle of high-precision infrared pair tube emission and
reception, which can be controlled with our company’s wireless fire alarm control panel/wireless fire protection linkage
control panel (hereinafter referred to as the control panel) and the smart home platform APP (hereinafter referred to as
the APP) are used together. The detector uses 470MHz wireless transceiver technology, with a highly integrated
micro-processing chip to process data. It has the characteristics of high sensitivity, long transmission distance, and low
power consumption. It can accurately and quickly detect changes in smoke concentration in the environment, accurately
and timely confirm the fire and call the police.
This product has beautiful appearance design, simple and convenient installation. It is suitable for places where a large
amount of smoke is generated when a fire occurs, while there is no smoke, dust and steam retention under normal
circumstances. This product is widely used in all kinds of residential buildings, which can detect fire early and protect
people's lives and property to the utmost extent.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user
is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Important: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.