Installation Instructions

Example: y (01010001011) = (01010 * * * 002) _ 1+(01010 * * * 004) _ 1
It means that when any one of the smEntere sensors with the first five digits of the
secondary code 01010 gives an alarm, or any one of the manual reports with the first
five digits of the secondary code 01010 gives an alarm, the audible and visual alarm
No.01010001 starts immediately.
Example: y (01010001011) = (01010 * * * 002) _ 1x (01010 * * * 004) _ 1
It means that when any one of the smEntere sensors with the first five digits of the
secondary code 01010 gives an alarm, and any one of the manual reports with the first
five digits of the secondary code 01010 gives an alarm at the same time, the audible
and visual alarm No.01010001 starts immediately.
4) Wildcards are allowed to be represented by "*" in the linkage formula to replace
any number between 0 and 9. Wildcards can only be used in the secondary code part
of the condition part (alarm class) at present, and cannot be used in types. For
example, 0*001315 means:
01001315+02001315+03001315+04001315+05001315+06001315+07001315+08001
315+09001315+0001315.
5) In a linkage formula, there can only be one equal sign representing causality.
5.6.2 Editing of linkage formula
Enter "annotation linkage" → "2. linkage programming",
The edit menu of linkage formula appears on the screen (as shown in Figure 5-7).
Figure 5-7
"Browse": Press "▲" and "▼" keys to display the linkage programming contents one
by one.
Note:
User secondary code and equipment type should be separated by a space.
5.7 linkage mode setting
Press the "linkage mode" key to bring up the linkage mode menu (as shown in Figure
5-8), press the direction key to select the corresponding mode, press the "Enter" key
to confirm the next item, and display "Setting complete!" , the system works in the