Installation Instructions
strong diffraction ability and long transmission distance.
4. Using advanced filtering algorithm, filtering rules can be set, which greatly avoids channel
collision.
5. The cover is made of fireproof ABS engineering plastic, which is beautiful, elegant, safe and
durable.
III Technical characteristics.
1. main power supply: rated working voltage DC5V (power adapter).
Backup power supply: lithium battery 3V/2400MAh.
2. Power consumption: monitoring power consumption ≤ 0.9W.
Alarm power consumption ≤ 2.2w.
3. Operation indicator: the operation indicator flashes during normal operation;
Fault indicator: the indicator is always on when the standby power fails;
Communication indicator: the indicator flashes when forwarding information;
4. Communication mode: 470MHz FSK coded bidirectional communication.
5. Wireless transmission power: 19dbm.
6. Communication distance: ≤50m.
7. Service environment: temperature:-10℃ ~+55℃.
Relative humidity ≤95%, non-condensing
Dimensions: 130mm in diameter and 48mm in height.
9. Cover material and color: ABS, white.
IV. Structural features.
1. The outline diagram of signal extender is shown in Figure 1.
Fig. 1 outline diagram of signal extender.
V. Installation
Note: Before installing the detector, please make sure that the battery polarity is correct and the
detector base is firmly installed.
1. Installation method.
The schematic diagram of the base of the detector is shown in Figure 2. Fix the base with two
self-tapping screws or stick it firmly with 3M glue. After the base is firmly installed, rotate the
bottom of the detector clockwise to align with the base, and then install the detector on the base.