Please read the instructions before installation and use.
I. General TC-ZJ402 wireless signal extender is suitable for domestic wireless alarm system and industrial wireless alarm system. The signal extender uses advanced wireless transceiver technology, built-in efficient anti-collision algorithm and can set filtering rules, so that the signal extender can work reliably in the system.
strong diffraction ability and long transmission distance. 4. Using advanced filtering algorithm, filtering rules can be set, which greatly avoids channel collision. 5. The cover is made of fireproof ABS engineering plastic, which is beautiful, elegant, safe and durable. III Technical characteristics. 1. main power supply: rated working voltage DC5V (power adapter). Backup power supply: lithium battery 3V/2400MAh. 2. Power consumption: monitoring power consumption ≤ 0.9W. Alarm power consumption ≤ 2.2w. 3.
Fig. 2 outline diagram of base. 2. Key points of on-site installation. The signal extender should be installed at an appropriate position in the wireless network, so that the signal extender can play the role of a bridge between the control panel and the detector.
General faults and their solutions are shown in the following table: Fault Cause Solution 1. The main power of signal Operation indicator does not 1. Reconnect the adapter. extender is abnormal. flash after the signal extender 2. Check the standby voltage 2. The standby power of signal is powered on. and reconnect it. extender is abnormal. When running, the device alarms successfully, and the Poor antenna contact. control panel does not display the fire alarm. Connect the antenna well. IX. Maintenance.
