User Manual

4.3 Adjusting illumination brightness
4.4 Adjusting reticle illumination
37
37
5. ANGLE MEASUREMENT
5.1 Measuring an angle
38
38
38
39
39
40
41
5.2 Resetting the horizontal angle to 0
5.3 Holding the horizontal angle
5.4 Inputting an arbitrary horizontal angle
5.5 Displaying the % slope of the vertical angle
5.6 Changing the horizontal angle from clockwise to counter clockwise
6. DISTANCE MEASUREMENT
6.1 Target setting
6.2 Distance measurement
6.3 Quick Mode
42
42
43
44
7. CORRECTION MODE
45
45
46
47
48
7.1 Changing the target constant
7.2 Changing the temperature
7.3 Changing the atmospheric pressure
7.4 Changing the ppm value
8. INITIAL SETTING
8.1 Overview
49
49
49
49
49
50
50
50
8.2 Entering the mode for initial setting 1
8.3 Entering the mode for initial setting 2
8.4 Entering the mode for initial setting 3
8.5 Entering the mode for initial setting 4
8.6 Entering the mode for initial setting 5
8.7 Entering the mode for setting of data and time
8.8 Example of changing an initial setting content
(selection of atmospheric correction)
8.9 Initial setting 1
8.10 Initial setting 2
8.11 Initial setting 3
8.12 Initial setting 4
8.13 Initial setting 5
51
52
53
55
55
55
56
8.14 Setting of date and time
9. ACCESSING THE FUNCTIONS
9.1 Accessing by help key
9.2 Accessing by 007
57
57
57
10. DIGITAL CAMERA
10.1 Turning the camera On and Off
10.2 Taking pictures
59
59
60
60
61
62
10.2.1 Taking pictures and measuring distance at the same time
10.2.2
10.2.3
Taking pictures without measuring distance
Zooming
2