User's Manual

7
Figure 1-4 Power led
Note: Usually when the light is red you have still one hour of power reserve. External
power and internal battery share same power light. When external power is used,
the led indicates the external power level. When the power is below 10%, the red led
will flash and you also hear three beeps every 60s.
1.2.2. Back side of the Receiver
Figure 1- 5 G6 back side
Number
Name
Function
1
Battery compartment cover
Protect the battery
2
Compartment locker
Open/lock the cover
3
SIM card slot
Put and read SIM card
4
Micro SD card slot
Put and read Micro SD card
Installing/Uninstalling SIM card and microSD card
There is a SIM card slot and a micro SD card slot in the middle of the two battery
houses, the upper one is micro SD card slot. To install the SIM card, just push the SIM
card into the SIM card slot according to the prompting figure. The microSD card
installation is similar to the SIM card installation.
To remove the SIM card and microSD card, push the card and then take out the card.
Note: When you select network mode to work, you need to install SIM card.
Installing/Uninstalling battery
To install the battery, push the compartment locker, insert the battery into the
battery compartment, then lock the compartment locker.
To remove the battery, push the compartment locker and then take out the battery.