User's Manual

13
3.1 Status
In Status, you can see the current work status of the receiver, some basic information.
Such as system mode, current datalink, coordinate, satellites, solution and so on. The
detailed information you can see from the picture.
Figure 3- 2 Status
3.2 Information
Then it’s the “Information”, this menu shows the information inside the receiver,
such as firmware version of the receiver, GNSS firmware version, GSM mode
information, sensor version, battery information and so on.
Figure 3- 3 Information
3.3 Download
“Download” is for downloading static data, you can download the datas you want to
use, you also can package them together. The format of raw data is “.dat” version, if
you want to use “.Rine” version, you can select.