User's Manual

Page |
27
5. Frequently Asked Questions
5.1. Question: Where is the Antenna Reference Point (ARP) located on the
G3100?
Answer: The NGS ARP is the bottom of the bolt on the underside of the G3100.
For more information see section 3.4 GNSS Antenna Offsets:
Figure 18: ARP Diagram
5.2. Question: Does the G3100 L1 vertical offset need to be added to the
measured height to the bolt?
Answer: No. Data collection software adds the vertical offset automatically
when the appropriate antenna type is selected.
5.3. Question: How do I know which battery I can remove without having
operations interrupted?
Answer: Use the battery status indicator in data collection software to
confirm which battery is in use before hot-swapping batteries.
5.4. Question: How do I configure a unit back to the PENTAX factory defaults?
Answer: Located on the PENTAX CD there is a text file called
G3100_Default_Config.txt Follow the Factory AsteRx2/AsteRx2e receiver
Settings in section 3 of this manual to upload that file into the G3100.