User's Manual
Page |
14
2.1.11.3. Formatting SD Card
Use Windows OS computer to format the SD Card prior to use
Figure 7: SD Card Formatting
Assigned Drive Letter (may vary)
SD Card Memory Capacity
(Included 2GB SD Card)
File system
Volume label
· Slide SD Card into SD Card reader
· Windows will recognize SD Card as removable device and assign a drive letter
· Right click on drive letter, select Format
· Select FAT as File System
· Verify the Quick Format box is unchecked to perform a full format
· Click Start to format the SD Card
· When done, make sure to “Safely Remove Hardware” as USB Mass Storage Device prior to
physically removing the SD Card from computer.