User's Manual
Page |
11
soft reboot the receiver resets the firmware, while retaining the current configurations. In a hard reboot
the G3100 will recall the receiver’s boot configuration file (default reboot).
Table 4: Power Button Operations
What
to
do
ON
Press and release, RED LED turns ON
OFF
Press and hold for 4 seconds and release or until power LED turns OFF
Data
Loggin
g
ON/OFF
Press twice < 1 second apart and Data Logging LED turns ON/OFF
Soft Reboot
Press three times < 1 second apart and Soft Reboot will occur
Hard Reboot
Press four times < 1 second apart and Hard Reboot will occur
2.1.8. Ports
Data (8-pin LEMO)
Serial 2
Power (4-pin LEMO)
External
Control (5-pin LEMO)
Serial 1
Figure 5: Ports Description
Table 5: Port Descriptions
LEMO
Description
What
to
use
it
for
8
-
pin
Data
External
Radio
5
-
pi
n
Control
Controller
or
Computer
4
-
pin
Power
External
Power