User Manual

Page |
11
soft reboot the receiver resets the firmware, while retaining the current configurations. In a hard reboot
the G3100 will recall the receivers boot configuration file (default reboot).
Ta ble 4: Po we r Butto n O pe ra tio ns
What to do
ON
Press and release, RED LED turns ON
OFF
Press
and hold for 4 seconds and release or until power LED turns OFF
Data Logging
ON/OFF
Press
twice < 1 second apart and Data Logging LED turns ON/OFF
Soft Reboot
Press
three times < 1 second apart and Soft Reboot will occur
Hard Reboot
Press four times < 1 second apart and Hard Reboot will occur
2.1.8. Ports
Data (8-pin LEMO)
Serial 2
Power (4-pin LEMO)
External
Control (5-pin LEMO)
Serial 1
Fig ure 5: Po rts De sc riptio n
Ta ble 5: Po rt De sc riptio ns
LEMO
Description What to use it for
8-pin Data External Radio
5-pin Control Controller or Computer
4-pin Power External Power