User Manual

Page |
7
SIM Card slot
UHF Radio Antenna
Figure 3: G2100, Rear View
The rear view of the G2100 shows the door to access the SIM card, and the SIM card allows
cellular service with the internal GSM modem.
GNSS raw data can be saved as a binary data with the extension of “”TIA”to the internal memory.
These saved data can be downloaded by a “Datacable of updating firmware and transferring
data”.
The ports and the product label can be seen on the underside of the G2100. There are 2 ports:
one serial ports and one external power input port. Also located on the base of the G2100 is a
TNC connector for a UHF antenna, which is utilized by the internal radio.
The threaded connector in the middle is a standard 5/8”connector for mounting onto survey poles
or accessories.
･Release Button for BatteryCompartment
･Data (5-pin LEMO)
For External Radio
For External Power
･Control (7-pin LEMO) USB & RS232C Serial
･CE / Bluetooth® Label
･5/8”Thread Nut
･Battery A Compartment
･Battery B Compartment
･TNC Connector for UHF Radio Antenna
Figure 4: G2100R, Bottom View