Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
40
5.4 MIPI
The SOM supports the MIPI interface and comply with MIPI standards.
Applicable standard Feature exceptions
MIPI Alliance Specification for Display Serial Interface None
MIPI Alliance Specification for DPHY v1.2 None
MIPI Alliance Specification for CPHY v1.0 None
Table 5.5- 1 MIPI_DSI
Applicable standard Feature exceptions
MIPI Alliance Specification for CSI-2 v1.3
RAW7 not supported DPCM
predictor 2 not supported
MIPI Alliance Specification for DPHY v1.2 None
MIPI Alliance Specification for CPHY v1.0
The maximum supported
data rate is 1.5Gsps
Table 5.5- 2 MIPI_CSI
5.5 USB
The SOM supports USB standards and exceptions.
Applicable standard Feature exceptions
Universal Serial Bus Specification, Revision 3.1
(August 11, 2014 or later)
SS Gen 2
UTMI Specification Version 1.05, released on 3/29/2001
None
On-The-Go and Embedded Host Supplement to the USB 3.0 Specification
(May 10, 2012, Revision 1.1 or later)
None
Table 5.6- 1 USB
5.6 PCIe
The SOM supports PCIe standards and exceptions
Applicable standard Feature exceptions