Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
4
USB
2x USB 3.1, one can support Type-C with DisplayPort
PCIe 2x PCIe, one Gen 2 1-lane with PHY 2.1 and one Gen 3 1-lane with PHY 3.0
SDIO SD V3.0 4-bit for SD card
QUP 4 bit each; Multiplexed serial interface functions, can be configured as UART, I2C, SPI
SLIMbus One, highly multiplexed, high-speed, baseline WCD9340/WCD9341
MI2S
Full duplex stereo or up to quad channel Tx/Rx MI2S (x3)
Up to eight channels for multi-channel Tx/Rx audio applications (x1)
GPIO
12+ GPIO ports
Others
ADC Interface
Support ADC interfaces
used for input voltage sense, battery temperature detection and general purpose
ADC
Touchscreen
support
Capacitive panels via ext IC (I2C, and interrupts)
Physical size
Size: 37mm x 60mm x7.1mm
Weight: approx. 10.3g
Interface: Connector
Operating
temperature
-20~50℃
RoHS All hardware components are fully compliant with EU RoHS directive