Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
38
RSENSE_EXT_P
Thermal conditions
Operating temperature -20 25 50 °C
Storage temperature -40 - 70 °C
Table 5.2- 1 Operating condition
Note
: For the thermal conditons, operatin and storage min and max temperature is only when the module is fully
tested and approved in the Initial Production stage.
5.3 Digital-logic characteristics
The digital I/O's performance depends on its pad type, usage, and power supply voltage.The SOM IO voltage
level is the same with VDDPX_3 except the SD card and analog input/output. The I2C, USB,MIPI and UART
comply with the standards.
5.3.1 Digital GPIO characteristics
The follow-int table shows the digital GPIO characteristics: