Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
30
4 Connector PIN Summary
4.1 CON2401 BTB Connector
Pin Signal Name Pin Signal Name
1 GND 2 PCIE_0_RST_N
3 MIPI_CSI0_LANE3_P 4 PCIE_0_WAKE_N
5 MIPI_CSI0_LANE3_N 6 PCIE_0_CLK_REQ
7 GND 8 GND
9 MIPI_CSI0_LANE2_N 10 PCIE0_TX_M
11 MIPI_CSI0_LANE2_P 12 PCIE0_TX_P
13 GND 14 GND
15 MIPI_CSI0_LANE1_N 16 PCIE0_REFCLK_P
17 MIPI_CSI0_LANE1_P 18 PCIE0_REFCLK_M
19 GND 20 GND
21 MIPI_CSI0_LANE0_N 22 PCIE0_RX_P
23 MIPI_CSI0_LANE0_P 24 PCIE0_RX_M
25 GND 26 GND
27 MIPI_CSI0_CLK_P 28 UFS2_L0_RX_M
29 MIPI_CSI0_CLK_N 30 UFS2_L0_RX_P
31 GND 32 GND
33 MIPI_CSI1_LANE3_N 34 UFS2_L0_TX_P
35 MIPI_CSI1_LANE3_P 36 UFS2_L0_TX_M
37 GND 38 GND
39 MIPI_CSI1_LANE2_P 40 UFS2_REF_CLK
41 MIPI_CSI1_LANE2_N 42 GND
43 GND 44 UFS_CARD_DET_N
45 MIPI_CSI1_LANE1_N 46 SDC2_CLK
47 MIPI_CSI1_LANE1_P 48 SDC2_CMD
49 GND 50 SD_CARD_DET_N