Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
19
MIPI_CSI0_CLK_N CON2401 29 CSI AI
Camera1 Interface
PIN Name Location PIN Voltage Type Description Notes
CCI_I2C_SDA0 CON2401 143 PX3 OD
CCI0 Date signal,
already pull up on SOM
CCI_I2C_SCL0 CON2401 141 PX3 OD
CCI0 Clock signal,
already pull up on SOM
CAM1_PWDN CON2401 119 PX3 DO
Camera power down
signal
CAM1_RSTN CON2401 95 PX3 DO Camera reset signal
CAM1_STROBE CON2401 115 PX3 DI Camera STROBE signal
CAM1_DVDD_EN CON2401 129 LV DO
Camera DVDD LDO
enable signal
CAM1_AVDD_EN CON2401 97 PX3 DO
Camera AVDD LDO
enable signal
CAM_MCLK1 CON2401 96 PX3 DO
Camera main clock
output
MIPI_CSI1_LANE3_N CON2401 33 CSI AI
MIPI Signals of
Camera1
Compliant with MIPI
Alliance Standard
Specification
MIPI_CSI1_LANE3_P CON2401 35 CSI AI
MIPI_CSI1_LANE2_P CON2401 39 CSI AI
MIPI_CSI1_LANE2_N CON2401 41 CSI AI
MIPI_CSI1_LANE1_N CON2401 45 CSI AI
MIPI_CSI1_LANE1_P CON2401 47 CSI AI
MIPI_CSI1_LANE0_N CON2401 51 CSI AI
MIPI_CSI1_LANE0_P CON2401 53 CSI AI
MIPI_CSI1_CLK_N CON2401 57 CSI AI
MIPI_CSI1_CLK_P CON2401 59 CSI AI
Camera2 Interface
PIN Name Location PIN Voltage Type Description Notes
CCI_I2C_SDA1 CON2401 145 PX3 OD
CCI0 Date signal,
already pull up on SOM
CCI_I2C_SCL1 CON2401 147 PX3 OD
CCI0 Clock signal,
already pull up on SOM
CAM2_PWDN CON2401 105 PX3 DO
Camera power down
signal
CAM2_RSTN CON2401 123 PX3 DO Camera reset signal
CAM2_STROBE CON2401 117 PX3 DI Camera STROBE signal
CAM2_DVDD_EN CON2401 109 PX3 DO
Camera DVDD LDO
enable signal
CAM2_AVDD_EN CON2401 103 PX3 DO
Camera AVDD LDO
enable signal