Users Manual

Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
18
Compliant with
MIPI Alliance
Specification for
Display Serial
Interface
MIPI_DSI1_CLK_P CON2402 20 DSI AO
MIPI_DSI1_CLK_N CON2402 22 DSI AO
MIPI_DSI1_LANE2_P CON2402 26 DSI AO
MIPI_DSI1_LANE2_N CON2402 28 DSI AO
MIPI_DSI1_LANE3_N CON2402 32 DSI AO
MIPI_DSI1_LANE3_P CON2402 34 DSI AO
MIPI_DSI1_LANE1_N CON2402 38 DSI AO
MIPI_DSI1_LANE1_P CON2402 40 DSI AO
LCD_RST_N CON2402 61 PX3 DO LCD reset signal
LCD_TE0 CON2402 59 PX3 DI LCD TE signal input
Table 3.2- 3 Display interfaces definition
3.2.4 Camera Interfaces
The SOM supports 3 x 4-lane + 1 x 2-lane camera interfaces.
Camera0 Interface
PIN Name Location PIN
Voltage
Type Description Notes
CCI_I2C_SDA0 CON2401 143 PX3 OD
CCI0 Date signal,
already pull up on SOM
CCI_I2C_SCL0 CON2401 141 PX3 OD
CCI0 Clock signal,
already pull up on SOM
CAM0_PWDN CON2401 113 PX3 DO
Camera power down
signal
CAM0_RSTN CON2401 99 PX3 DO Camera reset signal
CAM0_STROBE CON2401 121 PX3 DI Camera STROBE signal
CAM0_DVDD_EN CON2401 131 LV DO
Camera DVDD LDO
enable signal
CAM0_AVDD_EN CON2401 101 PX3 DO
Camera AVDD LDO
enable signal
CAM_MCLK0 CON2401 92 PX3 DO
Camera main clock
output
MIPI_CSI0_LANE3_P CON2401 3 CSI AI
MIPI Signals of
Camera0
Compliant with MIPI
Alliance Standard
Specification
MIPI_CSI0_LANE3_N CON2401 5 CSI AI
MIPI_CSI0_LANE2_N CON2401 9 CSI AI
MIPI_CSI0_LANE2_P CON2401 11 CSI AI
MIPI_CSI0_LANE1_N CON2401 15 CSI AI
MIPI_CSI0_LANE1_P CON2401 17 CSI AI
MIPI_CSI0_LANE0_N CON2401 21 CSI AI
MIPI_CSI0_LANE0_P CON2401 23 CSI AI
MIPI_CSI0_CLK_P CON2401 27 CSI AI