Users Manual Part 2
Table Of Contents
- 1 Physical Description
- 2 Interfaces Description
- 2.1 Interfaces Parameter Definitions
- 2.2 Interfaces Detail Description
- 2.2.1 Power Supply Interface
- 2.2.2 Touchscreen Interface
- 2.2.3 Display Interface
- 2.2.4 Camera Interfaces
- 2.2.5 Audio Interface
- 2.2.6 USB & DisplayPort Interface
- 2.2.7 PCIe Interface
- 2.2.8 SSC Interface
- 2.2.9 SDIO Interface
- 2.2.10 QUP Interface
- 2.2.11 Power on Interface
- 2.2.12 Reset Interface
- 2.2.13 Keys Interface
- 2.2.14 Sensor Interrupt Interface
- 2.2.15 Debug UART Interface
- 2.2.16 Battery Interface
- 2.2.17 ADCs Interface
- 2.2.18 PWMs and LED Current Driver Interface
- 2.2.19 Antenna Interface
- 3 Connector PIN Summary
- 4 Electrical Characteristics
Thundercomm TurboX C865 System on Module
Copyright © 2018 All Rights Reserved, Thundercomm Technology Co., Ltd.
4
MIPI Alliance Specification for CPHY v1.0 None
Table 4.5-1 MIPI_DSI
Applicable standard Feature exceptions
MIPI Alliance Specification for CSI-2 v1.3
RAW7 not supported DPCM
predictor 2 not supported
MIPI Alliance Specification for DPHY v1.2 None
MIPI Alliance Specification for CPHY v1.0
The maximum supported data
rate is 1.5Gsps
Table 4.5-2 MIPI_CSI
4.6 USB
The SOM supports USB standards and exceptions.
Applicable standard Feature exceptions
Universal Serial Bus Specification, Revision 3.1
(August 11, 2014 or later)
SS Gen 2
UTMI Specification Version 1.05, released on 3/29/2001
None
On-The-Go and Embedded Host Supplement to the USB 3.0 Specification
(May 10, 2012, Revision 1.1 or later)
None
Table 4.6-1 USB
4.7 PCIe
The SOM supports PCIe standards and exceptions
Applicable standard Feature exceptions
PCI Express Specification, Revision 3.0
Gen3
Table 4.7-1 PCIe
4.8 DisplayPort
The SOM supports DisplayPort standards and exceptions
Applicable standard Feature exceptions