Users Manual Part 2
Table Of Contents
- 1 Physical Description
- 2 Interfaces Description
- 2.1 Interfaces Parameter Definitions
- 2.2 Interfaces Detail Description
- 2.2.1 Power Supply Interface
- 2.2.2 Touchscreen Interface
- 2.2.3 Display Interface
- 2.2.4 Camera Interfaces
- 2.2.5 Audio Interface
- 2.2.6 USB & DisplayPort Interface
- 2.2.7 PCIe Interface
- 2.2.8 SSC Interface
- 2.2.9 SDIO Interface
- 2.2.10 QUP Interface
- 2.2.11 Power on Interface
- 2.2.12 Reset Interface
- 2.2.13 Keys Interface
- 2.2.14 Sensor Interrupt Interface
- 2.2.15 Debug UART Interface
- 2.2.16 Battery Interface
- 2.2.17 ADCs Interface
- 2.2.18 PWMs and LED Current Driver Interface
- 2.2.19 Antenna Interface
- 3 Connector PIN Summary
- 4 Electrical Characteristics
Thundercomm TurboX C865 System on Module
Copyright © 2018 All Rights Reserved, Thundercomm Technology Co., Ltd.
3
4 Electrical Characteristics
4.1 Absolute Maximum Ratings
The SOM needs to be designed in the operation conditions which is shown as below table.
Parameter Min Max Units
Input Power Voltage
USB_VBUS -0.3 28 V
VB AT
-0.3
6
V
VBATT_CONN_VSENSE_P,
VBATT_CONN_VSENSE_M,
RSENSE_EXT_M,
RSENSE_EXT_P
-0.3 6 V
ESD
ESD-HBM model rating
±2000
V
ESD-CDM model rating
±500
V
Table 4.1-1 Absolute rating condition
Notes: for the ESD, it will be valid and available only when the module is fully tested and approved in the Initial
Production stage.
4.2 Operating Conditions
The SOM needs to be designed in the operation conditons which is shown as below table.
Parameters Min Typical Max Units
Input Power voltage
USB_VBUS
+3.6
5
+13.2
V
VB AT
+3.6
3.8
+4.8
V
VB AT
3
A
VBATT_CONN_VSENSE_P,
VBATT_CONN_VSENSE_M,
RSENSE_EXT_M,
RSENSE_EXT_P
+3.6 3.8 +4.8 V
Thermal conditions
Operating temperature -20 25 70 °C
Storage temperature
-40
-
70
°C
Table 4.2-1 Operating condition