Users Manual
Table Of Contents
- 1 Physical Description
- Interfaces Description
- Interfaces Parameter Definitions
- Interfaces Detail Description
- Power Supply Interface
- Touchscreen Interface
- Display Interface
- Camera Interfaces
- Audio Interface
- USB & DisplayPort Interface
- PCIe Interface
- SSC Interface
- SDIO Interface
- QUP Interface
- Power on Interface
- Reset Interface
- Keys Interface
- Sensor Interrupt Interface
- Debug UART Interface
- Battery Interface
- ADCs Interface
- PWMs and LED Current Driver Interface
- Antenna Interface
- Connector PIN Summary
- Electrical Characteristics
Thundercomm TurboX C865 System on Module
Copyright © 2018 All Rights Reserved, Thundercomm Technology Co., Ltd.
37
K17 GND GND
K18 DSI0_C0_LN1_P MIPI DSI 0 (DPHY), differential lane 1 – plus
K19 GND GND
K20 DSI0_C2_LN3_P MIPI DSI 0 (DPHY), differential lane 3 – plus
K21 GND GND
K22 PCIE2_RX1_M_MDM PCIe 2 Gen 3 receive 1 - minus
K23 GND GND
K24 PCIE2_TX0_M_MDM PCIe 2 Gen 3 transmit 0 - minu
K25 GND GND
K26 WCD_SWR_TX_CLK SoundWire transmit clock
K27 WCD_SWR_TX_DATA0 SoundWire transmit data 0
K28 WCD_SWR_TX_DATA1 SoundWire transmit data 1
K29 WCD_SWR_RX_CLK SoundWire receive clock
K30 WCD_SWR_RX_DATA0 SoundWire receive data 0
K31 WCD_SWR_RX_DATA1 SoundWire receive data 1
K32 GPIO_0 GPIO 0
K33 GPIO_134 GPIO 134
K34 GPIO_133 GPIO 133
K35 GPIO_123 GPIO 123
K36 GPIO_26 GPIO 26
K37 CAM0_RST_N Camera 0 reset, GPIO 93
K38 GPIO_6_PWM PWM output, PM8150L GPIO 6
K39 DISPLAY_RESX2 GPIO 136
K40 RGB_1V2_EN GPIO 115
K41 RGB_1V8_EN QCA6391 UART RXD
K42 RGB_2V8_EN QCA6391 UART TXD
K43 DMIC01_CLK DMIC0/1 clock
K44 DMIC01_DATA DMIC0/1 data
K45 BATT_ID Battery ID
K46 BATT_THERM Battery temperature sense
K47 VBAT_CON VBAT
K48 VBAT_CON VBAT
K49 VBAT_CON VBAT
K50 VBAT_CON VBAT
3.2 J2 BTB Connector
Pin Signal Name Pin Signal Name
1 SDM_JTAG_TMS 9 SDM _JTAG_SRST_N
2 SDM_JTAG_TCK 10 SDM _DEBUG_UART_TX