Users Manual

Thundercomm TurboX C865 System on Module
Copyright © 2018 All Rights Reserved, Thundercomm Technology Co., Ltd.
28
B30 USB0_SS_RX1_P USB super-speed 0 receive 1 – plus
B31 USB0_SS_RX0_P USB super-speed 0 receive 0 – plus
B32 USB0_SS_TX0_P USB super-speed 0 transmit 0 – plus
B33 USB0_SS_TX1_P USB super-speed 0 transmit 1 – plus
B34 DP_AUX_P AUX P for DP
B35 PMK8002_PMIC_CLK clock for PMK8002
B36 FP_SPI_CLK SPI clock
B37 FP_SPI_MOSI SPI MOSI
B38 MDM_SKIN_THERM Thermal sensor for RF
B39 GPIO_9_P GPIO 9
B40 WSA1_EN Audio PA sound wire enable 1
B41 WSA2_EN Audio PA sound wire enable 2
B42 VREG_L8C_1P8 VREG_L8C_1P8
B43 VREG_IO_1P8 VREG_IO_1P8
B44 6DOF_L_RST GPIO 130
B45 6DOF_ULPM GPIO 126
B46 SDM_DEBUG_UART_TX Uart TX for system debug
B47 SDM_FAST_BOOT_0 Boot configuration 0
B48 GND GND
B49 GND GND
B50 GND GND
C1 GND GND
C2 RF_CLK1 RF CLOCK
C3 GND GND
C4 NC NC
C5 PM8250_GPIO3 PM8250 GPIO 3
C6 NC NC
C7 PM8150L_AMUX1 Analog Multiplexer input
C8 NC NC
C9 PM8150B_AMUX1 Analog Multiplexer input
C10 NC NC
C11 GND GND
C12 SDC2_DATA_1 Secure digital controller 2 data bit 1
C13 GND GND
C14 CSI1_B2_LN3_P MIPI CSI 1 (DPHY), differential lane 3 – plus
C15 GND GND
C16 CSI1_B0_LN0_P MIPI CSI 1 (DPHY), differential lane 0 – plus
C17 GND GND
C18 CSI1_A1_LN1_P MIPI CSI 1 (DPHY), differential lane 1 – plus
C19 GND GND
C20 CSI3_NC_CLK_P MIPI CSI 3 (DPHY), differential clock – plus
C21 GND GND
C22 CSI3_C1_LN2_P MIPI CSI 3 (DPHY), differential lane 2 – plus