Users Manual
Table Of Contents
- 1 Physical Description
- Interfaces Description
- Interfaces Parameter Definitions
- Interfaces Detail Description
- Power Supply Interface
- Touchscreen Interface
- Display Interface
- Camera Interfaces
- Audio Interface
- USB & DisplayPort Interface
- PCIe Interface
- SSC Interface
- SDIO Interface
- QUP Interface
- Power on Interface
- Reset Interface
- Keys Interface
- Sensor Interrupt Interface
- Debug UART Interface
- Battery Interface
- ADCs Interface
- PWMs and LED Current Driver Interface
- Antenna Interface
- Connector PIN Summary
- Electrical Characteristics
Thundercomm TurboX C865 System on Module
Copyright © 2018 All Rights Reserved, Thundercomm Technology Co., Ltd.
26
3 Connector PIN Summary
3.1 CON1 BTB Connector
Pin# Function Function description
A1 GND GND
A2 RF_CH0_CON WiFi 2.4/5G RF out, Chain0
A3 GND GND
A4 GPIO_74 GPIO 74
A5 GND GND
A6 PM_GPIO5 PM8150L GPIO 5
A7 PM_GPIO7 PM8150L GPIO 7
A8 PM_GPIO10 PM8150L GPIO 10
A9 GPIO_125 GPIO 125
A10 GPIO_141 GPIO 141
A11 SDC2_DATA_2 Secure digital controller 2 data bit 2
A12 GND GND
A13 SDC2_CMD Secure digital controller 2 command
A14 GND GND
A15 CSI1_A2_LN2_M MIPI CSI 1 (DPHY), differential lane 2 – minus
A16 GND GND
A17 CSI1_A0_CLK_M MIPI CSI 1 (DPHY), differential clock – minus
A18 GND GND
A19 CSI3_C0_LN0_M MIPI CSI 3 (DPHY), differential lane 0 – minus
A20 GND GND
A21 CSI3_C2_LN3_M MIPI CSI 3 (DPHY), differential lane 3 – minus
A22 GND GND
A23 CSI3_B1_LN1_M MIPI CSI 3 (DPHY), differential lane 1 – minus
A24 GND GND
A25 DSI1_B1_CLK_P MIPI DSI 1 (DPHY), differential clock – plus
A26 GND GND
A27 DSI1_C0_LN1_P MIPI DSI 1 (DPHY), differential lane 1 – plus
A28 GND GND
A29 USB0_HS_DM USB high-speed 0 data – minus
A30 GND GND
A31 USB0_SS_RX0_M USB super-speed 0 receive 0 – minus
A32 GND GND
A33 USB0_SS_TX1_M USB super-speed 0 transmit 1 – minus
A34 GND GND
A35 PMK8002_RF_CLK1 RF clock 1 for PMK8002
A36 GND GND