Data Sheet
Table Of Contents
- 5.User Manual
- Revision History
- Table List
- About This Document
- Table of Contents
- Chapter 1. Overview
- Chapter 2. Interfaces Description
- 2.1. Interfaces parameter definitions
- 2.2. Pin description
- 2.3. Interfaces detail description
- 2.3.1. Power supply interface
- 2.3.2. RGMII interfaces
- 2.3.3. SPDIF interface
- 2.3.4. Audio interface
- 2.3.5. USB interface
- 2.3.6. PCIe interface
- 2.3.7. MIPI DSI interface
- 2.3.8. HDMI interface
- 2.3.9. JTAG interface
- 2.3.10. SDIO interface
- 2.3.11. BLSP interface
- 2.3.12. Power on interface
- 2.3.13. Reset interface
- 2.3.14. Boot configuration interface
- 2.3.15. Debug UART interface
- 2.3.16. PWM
- 2.3.17. Sleep clock
- 2.3.18. SPMI
- 2.3.19. Antenna interface
- Chapter 3. Electrical Characteristics
- Appendix 1. Notices
- Appendix 2. Trademarks
- 5.User Manual_ Warning
Thundercomm TurboX C40x SOM Datasheet
- 13 -
Pad# Function Voltage Type Function description
112 GPIO_43 1.8V IO Can be configured as GPIO
113 GPIO_44 1.8V IO Can be configured as GPIO
114 GPIO_45 1.8V IO Can be configured as GPIO
115 GPIO_46 1.8V IO Can be configured as GPIO
116 GND - - -
117 GPIO_50 1.8V IO Can be configured as GPIO
118 GPIO_49 1.8V IO Can be configured as GPIO
119 GPIO_48 1.8V IO Can be configured as GPIO
120 GPIO_47 1.8V IO Can be configured as GPIO
A1 MIPI_DSI0_L0_P - -
MIPI display serial interface 0 lane 0 positive.
For TurboX C404 and C403: do not connect.
A2 MIPI_DSI0_L1_P - -
MIPI display serial interface 0 lane 1 positive.
For TurboX C404 and C403: do not connect.
A3 GND - - -
A4 PCIE0_REFCLK_M - - PCIE reference clock output (-)
A5 HDMI_TX2_P - -
HDMI TMDS data 2 positive.
For TurboX C404 and C403: do not connect.
A6 HDMI_TX1_P - -
HDMI TMDS data 1 positive.
For TurboX C404 and C403 do not connect.
A7 HDMI_TCLK_P
- - HDMI clock positive.
For TurboX C404 and C403 do not connect.
A8 HDMI_TX0_P
- - HDMI TMDS data 0 positive.
For TurboX C404 and C403 do not connect.
A9 PCIE0_RX_M - DI PCIE receiver minus
A10 USB_SS_TX_M - DO USB 3.0 transmitter differential pair minus
A11 USB_SS_RX_P - DI USB 3.0 receiver differential pair plus
A12 USB1_HS_DP - IO USB1 HS data plus
A13 GND - - -
A14 SDC2_CLK SDC2 IO Secure digital controller 2 clock
A15 SDC2_DATA_1 SDC2 IO Secure digital controller 2 data bit 1
A16 SDC2_DATA_3 SDC2 IO Secure digital controller 2 data bit 3
A17 GND - - -
A18 GPIO_14 1.8V IO Can be configured as GPIO
A19 GPIO_16 1.8V IO Can be configured as GPIO
A20 USB1_HS_ID 1.8V DI USB1 ID Pin
A21 GPIO_21 1.8V IO Can be configured as GPIO
A22 GND - - -
A23 GND - - -
A24 GND - - -
A25 GPIO_52 1.8V IO Can be configured as GPIO
A26 GPIO_54 1.8V IO Can be configured as GPIO
A27 GPIO_56 1.8V IO Can be configured as GPIO
A28 GPIO_58 1.8V IO Can be configured as GPIO
A29 GND - - -
B1 MIPI_DSI0_L0_M - -
MIPI display serial interface 0 lane 0 negative
For TurboX C404 and C403: do not connect.
B2 MIPI_DSI0_L1_M - -
MIPI display serial interface 0 lane 1 negative
For TurboX C404 and C403: do not connect.
B3 GND - - -
B4 PCIE0_REFCLK_P - - PCIE reference clock output (+)
B5 HDMI_TX2_M - -
HDMI TMDS data 2 negative.
For TurboX C404 and C430: do not connect.
B6 HDMI_TX1_M - -
HDMI TMDS data 1 negative.
For TurboX C404 and C430: do not connect.
nicholas.wang_thundercomm.com
2022-07-21 2:34:47 AM CST