Installation Guide

11
PHOTO MODE
To capture a Photo, verify the camera is in Photo mode.
If the Photo icon on your camera’s LCD screen is not
showing, press the Power/Mode Button repeatedly until
it appears.
To take a Photo:
Press the Shutter/Select Button. The camera will emit
the camera shutter sound.
BURST PHOTO MODE
To capture a Burst Photo series, verify the camera is
in Burst Photo mode. If the Burst Photo icon on your
camera’s LCD screen is not showing, press the
Power/Mode Button repeatedly until is appears.
In Burst Photo mode, your camera takes 3 photos
in 1.5 seconds.
To take a Burst Photo series:
Press the Shutter/Select Button. The camera will emit
one beep and the Camera Status Lights will flash while
recording.
TIME LAPSE MODE