Installation Guide

10
Upside Down: On/Off
Screen Saver: Off/1min/3min/5min
Power Saver: Off/1min/3min/5min
Format: No/Yes
Reset: No/Yes
VIDEO MODE
To record Video, verify the camera is in Video mode.
If the Video icon on your camera’s LCD screen is not
showing, press the Power/Mode Button repeatedly
until it appears.
To start recording:
Press the Shutter/Select Button. The camera will emit
one beep and the Camera Status Lights will flash while
recording.
To stop recording:
Press the Shutter/Select Button. The Camera Status
Light will stop flashing and the camera emits one beep to
indicate recording has stopped. This camera automatically
stops recording when the battery is out of power. Your
video will be saved before the camera powers off.
SETTINGS (continued)