Product Manual

TDR11079 TOUCH SWITCH PANEL
Installation & Wiring Instructions
1. Mount circuit control box securely and connect to power and accessories
as per wiring diagram. Ensure accessories and control box share a
common earth.
2. Cut a 20mm x 50mm hole in the desired location for the switch panel and
feed the VGA cable through the control box.
3. Secure the VGA cable to the rear of the switch panel and the circuit box.
4. Mount the switch panel using the supplied 3M double sided adhesive tape
ACC1 ACC2 ACC3 ACC4 ACC5 ACC6
Battery
VGA
cable
supplied
Front viewRear view
1 2 3
4 5 6