Product Manual

3
Gauge Instructions
INSTRUCTIONS
Operation
Turn on: Press power button once.
Change unit of measurement: Turn on and press power button until desired unit of
measure (PSI, BAR, KPA or KG/CM²) is shown on the right side of the screen.
Turn off: Press and hold power button for 5 seconds.
Turn light on or off: Press light button once.
Tyre Deflation
Step 1: Remove your tyres valve cap and turn on tyre gauge.
Step 2: Attach the tyre deflator to your tyres valve. Support the hose collar and rotate
the valve stem (clockwise).
Step 3: Push the hose collar towards valve. Then, push the valve remover towards the
valve and unscrew. Once unscrewed the pressure from the tyre should push
the collar and valve remover away from the stem.
NOTE: Pressure should now be indicated on the gauge.
Step 4: Slide collar away from valve stem. Tyre will begin deflating.
Slide collar towards the stem to show deflated pressure.
Step 5: Push valve remover back in and screw inner valve (clockwise) until tight.
Step 6: Remove tyre deflator and refit valve cap.
Step 7: Turn off tyre gauge by holding power for 5 seconds.