Recovery Equipment facebook.
WELCOME TO YOUR WEEKEND ESCAPE Confidently approach your next adventure knowing you can safely get out of any difficult situation with the Thunder Recovery range. Offering a comprehensive suite of products including winches and accessories, recovery straps and a complete recovery kit, Thunder is the perfect 4WD companion for any weekend escape. 2 www.thunderauto.com.au // www.thunderauto.co.
The Thunder winches feature water-proof 6 and 6.8 horsepower motors which offers high power, with lower current draw. This is due to the effectiveness of the waterproof planetary gearbox. Thicker torsion bars help alleviate the risk of your winch binding up in high torque situations. Supplied with both a wired and wireless remote, the Thunder winches can be operated in the most adverse conditions. 12V 12,500lb WINCH PART NO.
Both Thunder winches include: • Aluminium hawse fairlead • Winch controller • Wired & wireless remotes • Clevis hook 12V 9,500lb WINCH PART NO. TDR02095 SPECIFICATIONS RATED LINE PULL 9,500lbs (4,310kgs) single line MOTOR Series wound 6.8hp/5.07kW,12V DC GEAR TRAIN 3 stage planetary GEAR RATIO 212:1 CLUTCH Sliding ring gear BRAKING ACTION Automatic in the drum FAIRLEAD Aluminum hawse fairlead SYNTHETIC ROPE 9.
Dyneema® rope adds improved safety over wire cable by not recoiling back at the vehicle should it break under load, but instead dropping to the ground almost immediately. It also floats in water and will not rust. The Dyneema® rope supplied with the Thunder winches is genuine Dyneema®. DYNEEMA® ROPE 11mm PART NO. TDR02125R SPECIFICATIONS SUITABLE FOR 12,500lb winch DIMENSIONS 11mm x 24m CLEVIS HOOK MATERIAL Stainless steel eyelet NOTE Protective sleeve for added safety DYNEEMA® ROPE 9.5mm PART NO.
The Thunder standard and offset hawse fairleads are essential if using a synthetic rope as they avoid rope being caught between the rollers of fairleads designed for wire cable. STANDARD HAWSE FAIRLEAD PART NO. TDR02300 SPECIFICATIONS DIMENSIONS 300mm(L) x 80mm(H) x 30mm(D) CNT TO CNT 254mm MATERIAL Aluminium NOTE For use with Dyneema® rope only The Thunder offset hawse fairlead has been included in the Thunder range to predominantly suit bar mounted winches. OFFSET HAWSE FAIRLEAD PART NO.
The Thunder snatch straps are made of the highest quality nylon webbing that has been independently tested to at least 15% above their rated breaking strengths. They feature heavy duty reinforced stitching, a red centre flag and protective Neoprene sleeves on each end. 15,000kg SNATCH STRAP PART NO. TDR04002 SPECIFICATIONS DIMENSIONS 9m long, 100mm wide STRETCH 1.
TREE TRUNK PROTECTOR PART NO. TDR04008 SPECIFICATIONS DIMENSIONS 5m long, 75mm wide SAFE WORKING LOAD 5,000kg BREAKING STRENGTH 10,000kg minimum rating NOTE Eye and sleeve protectors and reinforced ends 10m WINCH EXTENSION PART NO. TDR04009 SPECIFICATIONS DIMENSIONS 10m long, 50mm wide SAFE WORKING LOAD 2,250kg BREAKING STRENGTH 4,500kg minimum rating NOTE Reinforced ends and polyester webbing WINCH DAMPER PART NO.
9,000kg SNATCH BLOCK PART NO. TDR04003 SPECIFICATIONS ROPE OR CABLE SIZE 8mm - 13mm SAFE WORKING LOAD 9,000kg BREAKING STRENGTH 15,000kg minimum rating 4,700kg BOW SHACKLE PART NO. TDR04005 SPECIFICATIONS DIMENSIONS 19mm x 22mm SAFE WORKING LOAD 4,700kg MATERIAL Cast iron steel construction 4,700kg HITCH RECEIVER PART NO. TDR04006 SPECIFICATIONS SAFE WORKING LOAD 4,700kg MATERIAL Heavy duty, high strength, drop forged and heat treated 10 www.thunderauto.com.au // www.thunderauto.co.
LEATHER RECOVERY GLOVES PART NO. TDR04011 SPECIFICATIONS MATERIAL Genuine leather NOTE Universal fit The Thunder Recovery Kit is a perfect starter kit for anyone contemplating winching or snatching recoveries. It contains an 8,000kg snatch strap, tree trunk protector, 2 x bow shackles and a pair of gloves all inside a heavy duty storage bag. 8,000kg RECOVERY KIT PART NO.
