User Manual

1: LCD screen 2: Upgrade co nnector 3: BL-2 (balance tap) connector 4: Charge Output 5: Enter/Stop button 6: INC button
7: DEC button 8: SEL/MODE button 9: Data port 10: Power input
Note:Please refer BL-2 connection diagram for TP batteries (page 9).
User's Manual
System Features
1.
a)
b)
c)
d)
e)
f)
g)
h)
i)
j)
Highly efficient Digital power system
Specially designed for safe Lipo and A123 charging.
Individual cell over charge protect (when balancing).
25 programmable memories for each battery type.
Adjustable charge mode algorithms.
Adjustable discharge cut-off voltage.
Fast balance charging.
Backlit LCD display.
Lipo and A123 battery recovery mode
Input/Output polarity protection.
Specifications
2.
a)
b)
c)
Input Power: 11-16V DC/10Amp at maximum charge rate
Memory profile: 25 Memories for each battery type
Supported battery chemistries:
Lipo/NiMH/Nicd/PB/A123
Charge voltage and cells:
 
Lipo battery:1-6cell
 CC to CV charge voltage: 4.18V/cell
 Full Charge Voltage 4.2V/Cell
NiMh, Nicd battery: 1-14cells
PB(SLA) battery: 6V/12V/24V
A123 Battery: 1-6cells
 CC to CV change voltage: 3.6V /Cell
 Full charge voltage: 3.65V/Cell
 
 
 
e)
f)
g)
h)
i)
j)
k)
l)
m)
n)
o)
p)
q)
r)
s)
Charge Current: 0.25A---10A
Charge control type Lipo/A123: CC/CV
Charge Nicd/NiMH: constant current –V delta peak
Charge/discharge cycles: 9 cycles
Discharge rate: 50mA- 1Amp
Discharge capacity: 7 Watt (Max 1A)
Capacity display: 0-9999mAH
Timeout limit: 2-10 hour (User selectable)
Display Tolerance: 0.5%
Display Type: Backlit 2 x 16 dot LCD
Charge maximum output: 80 Watt
Output Charge Terminal: 4mm standard banana jack
Input wire: 16 AWG silicon insulated.
Size: 118 x 85 x 28 (mm)/4.65”x3.4”x1.1”
Weight: 265g/9.4OZ
TP610C
2
THUNDER POWER RC