Instructions / Assembly

10 | P a g e
Pad and Washer isolators to Secure support structure. #2 hardware.
5. Attach the Cradle’s directly Above the Opener. #3 hardware
Included in the kit.
6. Place the Finish Ring over the Tube before passing the tubes
Through the ceiling. Glue it after attaching the tube to cradle.
7. Attach the shafts to the cradles, secure. (#4) hardware.
8. Adjust the height. Recheck all the nuts and bolts and
Secure them well!
Injury and or Property Damage can occur if Installation Instructions are not Followed Properly and Voids Any Warranty.
Thunder Mount Garage Systems LLC
The Overhead Garage Mount Solution.
Made In America.
Hours: M-F 9-5, 10-2 Sat. Closed Sunday 805-262-2895 PST.
[e-mail]
WWW.THUNDERMOUNTGARAGE.COM