Instructions / Assembly

4 | P a g e
One Mount to Each Track.
Remember the Isolator washers!!
Thunder’s Track Retainer Bolted to Channel and under Channel bolted to the Supports and bolted to Tube.
Image #1
“Horizontal to Door”
Cut holes in the ceiling beside the tracks where the tubes will protrude.
Use the chrome rings included as your guide.
Thunder Mounts Hardware.
#1 #2 #3 #4
#1 Lags and iso washers #2, 9/16 x ¾ inch Retainers #3, 9/16 x 2.5” tubes #4, 9/16 x ¾ Retainers 9/16 x 3 “for tubes
For Channels For Retainers For Tubes For Retainers and 2” tubes