Instructions / Assembly

3 | P a g e
Mounting above the ceiling:
1. Start with the door closed to locate the solid / wood /supports above door
tracks from where to safely and securely attach/mount the Thunder Mount
Channels. (It’s mandatory to mount channels horizontal with the
door)Page 2. Retainers attach in the channel facing each other and adjust
in one inch increments left or right.
2. Directly below where the Channels have been placed, to the outside of the
Tracks, mark the ceiling and cut a 2.5 inch hole at the exact location for
The tubes to go through the ceiling / drywall.
“L square or a flash light strait up works well”.
Mark and Cut Open a 2.5/8 Hole in Ceiling,
This Installation needed two pieces of wood added to support
The “Channels in the proper direction” and was easily resolved.
This is the Right Way! Do this.