Instructions / Assembly

3 | Page
This is the Right Way! Do this.
One Mount to Each Track.
Remember the Isolator washers!!
Thunder’s Track Cradle attached to Channel and under Channel bolted to the Supports and bolted to Tube.
Image #1
“Horizontal to Door”
Thunder Mounts Hardware.
#1 #2 #3 #4
#1 Lags and iso washers #2, 9/16 x ¾ inch Cradles #3, 9/16 x 2.5” tubes #4, 9/16 x ¾ cradles 9/16 x 3 “for tubes
For Channels For Cradles For Tubes For Cradles and 2” tubes
Track Isolator washers, Cradles bolt facing towards each other. Cradles Face
3. Drill 1/8 x 1 inch deep holes in the structure to attach the Channels.
4. Bolt on the “Wider Tube” to the Cradles in the second set of holes