Thule Jogging Brake Kit Instructions B 51100902
These instructions contain many WARNINGS. Read and understand all of the Warnings. Failure to assemble and use this accessory correctly may lead to serious personal injury to your passenger. Initial Assembly Time: About 5 minutes. GENERAL WARNING The brake cable does not need to be disassembled for assembly. • Use wrist safety strap at all times. • Always use seat belts. • Always use parking brake when jogging stroller is stationary. • Never in-line skate with the Jogging Kit.
7. 8. 9. 10. 11. Place the brake lever on the centre of the handlebar so that the lever points to the left. Insert the aluminum shim between the brake lever mounting clamp and the handlebar tube as shown in Figure 2. Close the brake lever mounting clamp around the handlebar (and shim) and tighten using a 5mm Allen Key. Re-attach the front wheel and adjust the main body of the Brake Kit so that the centre bolt of the brake calipers line up with the centre of the wheel.
Thule Child Transport Systems Ltd. 105 - 5760 9th Street SE Calgary, AB T2H 1Z9 Canada 4 info@thule.com www.thule.
