Operation Manual

51100457 - C

4.8 Install a thule conversIon kIt

A. Select a Thule Conversion Kit from the following:

• Thule Strolling Kit

• Thule Jogging Kit

• Thule Bicycle Trailer Kit

• ThuleCross-CountrySkiing&HikingKit

B. Install and use the selected kit according to the

instructions included with the Thule Conversion Kits.

4.7 InstallInG the handleBar

A. Position the handlebar behind the carrier with the

handles pointing rearwards.

B. With both hands press and hold the spring pins in on

both ends of the handlebar. (See image 1)

C. Slide both ends of the handlebar into the upper frame of

the carrier. Allow the spring pins to pass inside the

upper frame. (See image 2)

D. Slide the handlebar into the upper frame until the spring

pins engage.

E. Verify that the handlebar is securely attached to the

carrier by giving it a sharp pull - it should not pull out.

F. To remove the handlebar; press both of the spring pins

through the upper frame and pull the handlebar out.

Repeat this process to remove the brake handle from the

handlebar.

WARNING

Any load attached to the handle

affects the stability of the child carrier.

NOTICE

The HeightRight™ adjustable handlebar has

two positions; high and low. Remove the

handlebar and turn it over to change between

these two positions.