Specifications

H WNR -300 Hercules Wireless N Router
User Manual – 31/102
- On the home page, click WAN settings
(Internet connection).
- Select the Internet connection mode:
ADSL Ethernet modem or Internet "Box",
Cable Modem or Router.
If you select the ADSL Ethernet modem
mode:
- Select the PPPoE connection type.
- Enter your connection username (login)
and password.
This information can be found in the
membership details sent to you by your
ISP.
- Also enter a valid MTU value.
The M TU value corresponds to the
maximum value, in bytes, of transmitted
data packets (for example, 1500 bytes on
an ADSL WiFi network).
- If you wish, you can always stay
connected, thereby leaving your Internet
connection enabled all the time; you can
also choose to disconnect automatically
after a certain length of time.
If you select the Internet "Box", Cable
Modem or Router mode
- Select the Assign IP type: Static IP or
Automatic DHCP.
- If you select Automatic DHCP, the DHCP
server will be responsible for assigning the
IP address.
- Select Static IP if you have subscribed to
an Internet line with a fixed IP address.
This information can be found in the
membership details sent to you by your
ISP.
- Enter the IP address, subnet mask, and
default gateway.