Specifications

Hercules Wireless N Router H WNR -300
26/102 – User Manual
- Click Next to move on to step 3: Enabling your
WiFi network.
If you connect to the Internet via an ADSL Ethernet modem:
- Select the PPPoE connection type.
- Enter your connection username (login) and
password.
This information can be found in the membership
details sent to you by your ISP.
- Also enter a valid MTU value.
The M TU value corresponds to the maximum
value, in bytes, of transmitted data packets (for
example, 1500 bytes on an ADSL WiFi network).
- If you wish, you can always stay connected,
thereby leaving your Internet connection enabled
all the time; you can also choose to d i s c onnect
automatically after a certain length of time.
- Click Next to move on to step 3: Enabling your
WiFi network.
If you use another connection mode (PPTP or L2TP)
- For information on your connection mode, please verify your connection information found in the
membership details sent to you by your ISP.
- If you select the PPTP connection type:
- Select PPTP in the drop-down list.
- Enter the host name supplied when subscribing
to the service.
- If necessary, click the Clone button to clone your
PC's MAC address.
- Enter your connection username (login) and
password.
- Also enter the PPTP gateway and, if you wish, a
connection ID for this gateway.
This information can be found in the membership
details sent to you by your ISP.
- Enter a valid MT U value.
The M TU value corresponds to the maximum
value, in bytes, of transmitted data packets (for
example, 1500 bytes on an ADSL WiFi network).
- Click Next to move on to step 3: Enabling your
WiFi network.