Specifications

Hercules Wireless N Router H WNR -300
20/102 – User Manual
2.9.1. Connecting to a network in master mode
N o t e : by default, your Hercules Wireless N Router is configured to master mode, me an ing that it will serve
as the access point to which other WPS devices will be able to connect.
1
st
option: use the WPS button located on the Router
- On your WiFi Router: press the W P S button  located on the back
of the Router.
You now have two minutes to connect your Hercules Wireless N USB
Key to the Router. You will not have to repeat this step the next time
you connect.
- Press the W P S button located on the side of the Hercules
Wireless N Key or the WPS button on a WPS-compatible device.
2
nd
option: use the WPS button accessible in WiFi Manager N
- On the WiFi Manager N home page, press the
Automatic WiFi client connection (WPS)
button.
Push-Button Configuration method (PBC) is
selected by default.
- Click the connection button.
Alternatively:
- Select Personal Identification Number method
(PIN code).
- Enter the PIN code of the WPS device you wish to
connect.
- Click the connection button.
To find out the P I N c o d e for your WPS device,
please refer to section 4.3.3. Connecting to a
network with a PIN code in the user manual of
your Hercules Wireless N USB Key, or refer to
the manual supplied by the manufacturer of your
WPS device.