Operation Manual
Table Of Contents
- CouvHotasWarthog120x160_recto
- 01_eng_HOTAS Warthog_Hardware v1
- 02_fra_HOTAS Warthog_Hardware v1
- 03_deu_HOTAS Warthog_Hardware v1
- 04_ned_HOTAS Warthog_Hardware v1
- 05_ita_HOTAS Warthog_Hardware v1
- 06_spa_HOTAS Warthog_Hardware v1
- 07_por_HOTAS Warthog_Hardware v1
- 08_rus_HOTAS_Warthog_Hardware v1
- CouvHotasWarthog120x160_verso
13/18
- Turn the module upside down and put it back in its place:
(In this position, the AFTERBURNER stop is now enabled)
- Put the removable bar back between the 2 throttle levers, then replace and re-tighten the
2 screws.
IMPORTANT NOTE:
In order to avoid any possible damage to the AFTERBURNER module,
you must never use the throttle levers without the removable bar properly installed (using the
2 screws) between the 2 throttle levers.