Europe, Middle East ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL PORTUGUÊS РУССКИЙ ΕΛΛΗΝΙΚΑ TÜRKÇE POLSKI اﻟﻌﺮﺑﻴﺔ North America/ Norteamérica ENGLISH FRANÇAIS ESPAÑOL Latin America/ América Latina ENGLISH ESPAÑOL PORTUGUÊS Asia Pacific 日本語 繁體中文 한국어
For Xbox One and Windows User Manual 1/22
TECHNICAL FEATURES 1 2 3 4 5 6 MODE button + red/green indicator light 7 Large threaded hole (for attachment system and fastening screw) 8 Attachment system 9 Metal fastening screw Base Wheel 2 sequential paddle shifters (up & down) D-pad with push button Xbox Guide button + white indicator light 2/22
15 Thrustmaster Quick Release 16 Connector for TURBO POWER power supply 17 Connector for removable USB cable 18 Connector for pedal set 19 Connector for TH8A shifter (shifter sold separately) 20 TURBO POWER power supply 21 Power supply cable 22 Removable USB cable PLUGGING THE WHEEL INTO AN ELECTRICAL OUTLET: PLEASE READ CAREFULLY! Never plug the TURBO POWER power supply into an electrical outlet with a different voltage! The TURBO POWER power supply’s voltage is indicated on the label located above the f
WARNING Before using this product, please read this manual carefully and save it for later reference. * * * * * * * * * * * * * Warning – Electrical shock Keep the product in a dry location and do not expose it to dust or sunlight. Do not twist or pull on the connectors and cables. Do not spill any liquid on the product or its connectors. Do not short-circuit the product. Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.
Warning – Injuries due to Force Feedback and repeated movements (continued) * If the symptoms or pain indicated persist when you start playing again, stop playing and consult your doctor. * Keep out of children’s reach. * During gameplay, always leave both hands correctly positioned on the wheel without completely letting go. * During gameplay, never place your hands or your fingers under the pedals or anywhere near the pedal set.
COMPATIBILITY WITH THE THRUSTMASTER ECOSYSTEM Pedal sets The TS-XW RACER base is compatible: - On Xbox One and Windows, with the Thrustmaster T3PA and T3PA-PRO pedal sets that connect directly to the connector for pedal set (18). - On Windows, with the Thrustmaster DB9 PEDALS T.RJ12 ADAPTER that enables the nonThrustmaster pedal sets equipped with a DB9 connector to connect to the connector for pedal set (18).
INSTALLING THE WHEEL ON ITS BASE Align the connector positions using the arrows: Base (1) connector: Arrow pointing upwards Racing wheel (2) connector: Arrow pointing upwards Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (15) device’s ring anticlockwise, while holding the racing wheel (2) in position. Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel clockwise.
ATTACHING THE RACING WHEEL Attaching the racing wheel’s base to a cockpit 1. Place the racing wheel’s base on the cockpit shelf. 2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small screw threads located on the underside of the racing wheel. Important: The length of the two M6 screws must not exceed the thickness of the shelf + 12 mm; longer screws could cause damage to internal components located in the racing wheel’s base. 3.
ATTACHMENT / REMOVAL DIRECTION To tighten: Turn the screw anticlockwise To release: Turn the screw clockwise 9/22
INSTALLATION ON XBOX ONE 1. Connect the pedal set to the connector (18) located at the back of the racing wheel's base. 2. Connect the TURBO POWER power supply cable (20) to the connector (16) located at the back of the racing wheel's base. 3. Connect the removable power supply cable (21) to the TURBO POWER power supply (20). 4. Connect the removable power supply cable (21) to a mains outlet with proper voltage specifications. 5.
INSTALLATION ON PC 1. Go to http://support.thrustmaster.com, then select Racing Wheels / TS-XW RACER to download the drivers and the force feedback software for PC. 2. Once the download is complete, launch the installation, and follow the on-screen instructions to connect the wheel’s USB plug to your computer and complete the installation. 3. Once the installation is complete, click Finish and restart your computer. 4.
UPDATING YOUR RACING WHEEL’S FIRMWARE The firmware included in your racing wheel’s base can be updated to a more recent version featuring product enhancements. To display the firmware version that your racing wheel is currently using and update it if required: on PC, visit http://support.thrustmaster.com. Click Racing Wheels / TS-XW RACER, then select Firmware and follow the instructions describing the download and installation procedure.
TECHNICAL FEATURES 1 Metal support for conical stop (not installed by default) 2 Conical stop 3 Attachment screw for metal support 4 2.
WARNING Before using this product, be sure to read these instructions carefully and save them for future reference. For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet. THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES. Warning – Pedal set pinching hazard during gaming sessions * * * * Keep the pedal set out of the reach of children.
AUTOMATIC CALIBRATION OF PEDALS IMPORTANT: - Never connect or disconnect the pedal set from the base of the wheel when the wheel is connected to the system or PC, or during gaming sessions, to avoid calibration problems. = Always connect the pedal set to the wheel before connecting the wheel to the system or PC. - Once the wheel has self-calibrated and the game has started, the pedals automatically calibrate themselves after being pressed a few times.
ADJUSTING THE PEDAL SET Each of the three pedals includes: - A metal head (8) with multiple perforations (nine for the accelerator – six for the brake – six for the clutch). - A plastic head support (7) (placed between the head and the arm) with four perforations. - A pedal arm (6) with two perforations. ATTENTION: To avoid any calibration problems, be sure to always disconnect your wheel’s USB cable from the system or PC before making any adjustments to your pedal set.
Adjusting the SPACING of the three pedals - Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and its support (7) in place. - Select your preferred position (to the left, centered, or to the right), then replace and re-tighten the screws so that the metal head (8) and its support (7) are held firmly in place.
Installing the conical stop (“CONICAL RUBBER BRAKE” mod) This modification (or “mod”) is not essential, and is not installed by default. This means that the brake pedal functions perfectly even if the mod is not installed. This mod lets you experience a different feeling and resistance when braking. It’s up to you whether or not to install it, depending on your own preferences. - Screw the conical stop (2) onto its metal support (1).
- Using the included 2.5 mm Allen key (4), attach the unit using the attachment screw (3) and the small central screw thread located on the underside of the pedal set.
CONSUMER WARRANTY INFORMATION Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product.
Liability If permitted under applicable law, Guillemot Corporation S.A.
COPYRIGHT © 2017 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. All other trademarks are the property of their respective owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. Made in China. Manufactured and distributed by Guillemot Corporation S.A. under official licence from Sparco S.p.A. Sparco is a registered trademark of Sparco S.p.A.
