Europe, Middle East ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL PORTUGUÊS РУССКИЙ ΕΛΛΗΝΙΚΑ TÜRKÇE POLSKI اﻟﻌﺮﺑﻴﺔ North America/ Norteamérica ENGLISH FRANÇAIS ESPAÑOL Latin America/ América Latina ENGLISH ESPAÑOL
FOR XBOX ONE AND PC User Manual WARNING: To ensure that your TMX racing wheel functions correctly with Xbox One and PC games, you may be required to install the game’s automatic updates (available when your console or PC is connected to the Internet).
TECHNICAL FEATURES 1 2 3 4 5 6 7 Xbox Guide button + White indicator light 8 MODE button + Red/Green indicator light 9 Large threaded hole (for attachment system and fastening screw) 10 Attachment system 11 Metal fastening screw TMX base Wheel 2 sequential paddle shifters (up & down) Directional buttons Action buttons Action buttons 12 Steering axis 13 Xbox Guide button + White indicator light 14 Power cable or Power supply connector (varies from one country to another) 15 Racing wheel USB cable and co
WARNING Before using this product, please read this manual carefully and save it for later reference. Warning – Electrical shock Keep the product in a dry location and do not expose it to dust or sunlight. Do not twist or pull on the connectors and cables. Do not spill any liquid on the product or its connectors. Do not short-circuit the product. Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.
Warning – Injuries due to force feedback and repeated movements (continued) * If the symptoms or pain indicated persist when you start playing again, stop playing and consult your doctor. * Keep out of children’s reach. * During gameplay, always leave both hands correctly positioned on the wheel without completely letting go. * During gameplay, never place your hands or your fingers under the pedals or anywhere near the pedal set.
SETTING UP THE RACING WHEEL FOR XBOX ONE 1. Connect the pedal set to the connector (17) located at the back of the racing wheel's base. 2. Connect the power supply cable to the connector (14) located at the back of the racing wheel's base. 3. Plug the power supply cable into an electrical outlet with the same voltage specifications. 4. Connect the racing wheel’s USB connector (15) to one of the console’s USB ports. 5. Once your console is powered on, your racing wheel will calibrate itself automatically.
SETTING UP THE RACING WHEEL FOR PC 1. Go to http://support.thrustmaster.com to download the drivers and the force feedback software for PC. Click Racing Wheels / TMX Force Feedback, then select Drivers. 2. Once the download is complete, launch the installation, and follow the on-screen instructions to connect the wheel’s USB plug to your computer and complete the installation. 3. Once the installation is complete, click Finish and restart your computer. 4.
PC MAPPING 7/20
ATTACHING THE RACING WHEEL Attaching the racing wheel to a table or a desktop 1. Place the racing wheel on a table or any other horizontal, flat and stable surface. 2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning the screw counterclockwise, so that it feeds into the large threaded hole (9) located beneath the racing wheel, until the wheel is perfectly stable.
ATTACHMENT / REMOVAL DIRECTION To tighten: Turn the screw anticlockwise To release: Turn the screw clockwise 9/20
AUTOMATIC RACING WHEEL CALIBRATION The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and connect the racing wheel’s USB connector to the Xbox One. During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 900 degree angle, before stopping at the center. WARNING: Never touch the racing wheel during the self-calibration phase! (This could result in improper calibration and/or personal injuries.
TECHNICAL FEATURES 1 Metal support for conical stop (not installed by default) 2 Conical stop 3 Attachment screw for metal support 4 2.
WARNING Before using this product, be sure to read these instructions carefully and save them for future reference. For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet. THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES. Warning – Pedal set pinching hazard during gaming sessions * * * * Keep the pedal set out of the reach of children.
AUTOMATIC CALIBRATION OF PEDALS IMPORTANT: - Never connect or disconnect the pedal set from the base of the wheel when the wheel is connected to the console or PC, or during gaming sessions, to avoid calibration problems. = Always connect the pedal set to the wheel before connecting the wheel to the console or PC. - Once the wheel has self-calibrated and the game has started, the pedals automatically calibrate themselves after being pressed a few times.
ADJUSTING THE PEDAL SET Each of the three pedals includes: - A metal head (8) with multiple perforations (nine for the accelerator – six for the brake – six for the clutch). - A plastic head support (7) (placed between the head and the arm) with four perforations. - A pedal arm (6) with two perforations. ATTENTION: To avoid any calibration problems, be sure to always disconnect your wheel’s USB cable from the console or PC before making any adjustments to your pedal set.
Adjusting the SPACING of the three pedals - Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and its support (7) in place. - Select your preferred position (to the left, centered, or to the right), then replace and re-tighten the screws so that the metal head (8) and its support (7) are held firmly in place.
Installing the conical stop (“CONICAL RUBBER BRAKE” mod) This modification (or “mod”) is not essential, and is not installed by default. This means that the brake pedal functions perfectly even if the mod is not installed. This mod lets you experience a different feeling and resistance when braking. It’s up to you whether or not to install it, depending on your own preferences. - Screw the conical stop (2) onto its metal support (1).
- Using the included 2.5 mm Allen key (4), attach the unit using the attachment screw (3) and the small central screw thread located on the underside of the pedal set.
CONSUMER WARRANTY INFORMATION Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product.
Additional warranty provisions During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process – and by providing the consumer with the re
