Europe, Middle East ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL PORTUGUÊS РУССКИЙ ΕΛΛΗΝΙΚΑ TÜRKÇE POLSKI اﻟﻌﺮﺑﻴﺔ North America/ Norteamérica ENGLISH FRANÇAIS ESPAÑOL Latin America/ América Latina ENGLISH ESPAÑOL PORTUGUÊS Asia Pacific 日本語 简体中文 한국어 ENGLISH
FOR XBOX ONE User Manual WARNING: To ensure that your TX Racing Wheel functions correctly with games for XBOX ONE, you may be required to install the games' automatic updates (available when your games console is connected to the Internet).
TECHNICAL SPECIFICATIONS 1 2 3 4 5 6 7 8 9 Racing wheel base Racing wheel 2 sequential gear shift levers (Up & Down) Multidirectional D-Pad (Engine Start) Manettino (2 positions) MODE button + Red/Green indicator light 12 Thrustmaster Quick Release 13 Controller pairing (for Kinect™ detection) 14 Mains supply connector (type A or B) (Varies from one country to another) Xbox Guide button White indicator light Large threaded hole (for attachment system and tightening screw) 10 Attachment system 11 Metal
CONNECTING THE RACING WHEEL TO THE MAINS = PLEASE READ BEFORE PROCEEDING! Your racing wheel's power supply varies according to the country where you purchased your device. The mains supply can be: Internal, with: * A power supply unit located directly inside the racing wheel's base, with a type A connector *A 220-240V mains power supply cable = compatible only with a 220-240V electrical supply.
WARNINGS Before you use this product, please read this documentation carefully and keep it safe should you need to consult it later. Warning – Electric shock * Store the product in a dry location and do not expose it to dust or sunlight. * Respect the connection direction. * Do not twist or pull the connectors and cables. * Do not spill any liquid on the product or its connectors. * Do not short-circuit the product.
Warning – Injuries due to force feedback and repeated movements (suite) * If the symptoms or pain indicated above persist when you start playing again, stop playing and consult your doctor. * Keep out of children’s reach. * During games, always leave both hands correctly positioned on the steering wheel without letting it go completely. * During gameplay, never place your hands or your fingers under the pedals or anywhere near the pedal set.
Warning – Pedal set pinch hazard when playing * Keep the pedal set out of children’s reach. * When playing, never place your fingers on or anywhere near the sides of the pedals. * When playing, never leave your fingers on or anywhere near the pedals' rear base. * When playing, never place your fingers on or anywhere near the pedals' front base. NEVER NEVER Warning – Pedal set pinch hazard when not playing * Store the pedal set in a safe place, and keep it out of children’s reach.
ATTACHING THE FERRARI 458 ITALIA RACING WHEEL TO ITS BASE Align the connector locations using the arrows: Base (1) connector: Arrow pointing upwards Racing wheel (2) connector: Arrow pointing upwards Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (12) device's ring counterclockwise, while holding the racing wheel (2) in position. Then, tighten the ring as much as you can; to do so, hold the ring in position and rotate the racing wheel clockwise.
ATTACHING THE RACING WHEEL Attaching the racing wheel to a table or a desktop 1. Place the racing wheel on a table or any other horizontal, flat and stable surface. 2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning the screw counterclockwise, so that it feeds into the large threaded hole (9) located beneath the racing wheel, until the device is perfectly stable.
ATTACHMENT / REMOVAL DIRECTION To tighten: Turn the screw counterclockwise To release: Turn the screw clockwise 9/16
Attaching the racing wheel's base to a cockpit 1. Place the racing wheel's base on the cockpit shelf. 2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small threaded holes located beneath the racing wheel. Important: The length of the M6 screws should not exceed the thickness of the shelf + 12 mm; longer screws could cause damage to internal components located in the racing wheel's base. 3.
UPGRADING YOUR RACING WHEEL'S FIRMWARE The firmware included in your racing wheel's base can be upgraded to a more recent version featuring product enhancements. To display the firmware version that your racing wheel is currently using and update it if required: on PC, visit http://support.thrustmaster.com. Click Racing Wheels / TX Racing Wheel, then select Firmware and follow the instructions describing the download and installation procedure. SETTING UP THE RACING WHEEL FOR THE XBOX ONE 1.
If your racing wheel and pedal set do not operate correctly, or if calibration seems incorrect: Turn off your console, disconnect your racing wheel entirely, reconnect all cables (using the mains power supply cable and pedal set), then restart your console and your game. CONTROLLER PAIRING (13) To ensure correct detection of your racing wheel, the device's controller pairing (located on the upper section of the racing wheel's base) must always remain in the KINECT™ camera's field of vision.
MODE BUTTON AND INDICATOR LIGHT (6) MODE button for the pedal set The pedal set included with the TX Racing Wheel features 2 pedals. When using this pedal set, make sure that the indicator light remains red, or the accelerator pedal will not function correctly. The TX Racing Wheel is also compatible with Thrustmaster pedal sets featuring 3 pedals (sold separately; forthcoming release); these enable you to electronically swap the accelerator and clutch pedals.
CONSUMER WARRANTY INFORMATION Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product.
Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose warranty period has expired. In the United States of America and in Canada, this warranty is limited to the product’s internal mechanism and external housing.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. COPYRIGHT © 2017 Guillemot Corporation S.A. All rights reserved.
